Luxury Cars Gallery

Ferrari 599 GTB Fiorano HGTE

When it first debuted, the Ferrari 599 GTB Fiorano set a new standard in terms of performance that remains a benchmark for new sports car development to this day. Now Ferrari is introducing the new Ferrari 599 GTB Fiorano HGTE (Handling Gran Turismo Evoluzione) package for the model to further underscore its sportiness and handling.

The package includes a modified set-up with stiffer springs and rear anti-roll bar as well as new calibration settings for the magnetorheological shock absorbers when the manettino is at its sportier settings. The ride height has also been lowered which in turn lowers the car’s centre of gravity. This combined with the new set-up helps improve body control. The package also includes specifically optimised tyres featuring a compound that offers even better grip.

The car’s electronics have also evolved to ensure even more prompt response to driver commands. The F1 gearbox’s shifts are now even faster in high-performance settings, while a new engine software strategy has improved accelerator response.

The exhaust silencer has also been modified with the result producing an even more marked and thrilling sound under hard usage whilst still delivering just the right comfort levels at cruising speed.

From a styling point of view, the package also includes some distinctively sporty exterior and interior features with carbon-fibre widely used in the latter. The 20″ split-rim wheels are new with a special diamond-cut and matte silver finish. The rear diffuser is finished in matte black to underscore the car’s new set-up and highlight the chromed tail pipes. The cabin is sportier too thanks to a sophisticated mix of full-grain leather, black Alcantara® and carbon-fibre trim.

The new seats are trimmed in a new two-tone combination of leather with black Alcantara® inserts, and the seat backs are trimmed entirely in carbon-fibre. Embroidered in contrasting stitching on the headrest are a Prancing Horse and the words “Handling GTE“.

September 28th, 2009 by admin in Ferrari | No Comments

Ferrari 599XX

Ferrari 599XX, while based on the Ferrari 599 GTB Fiorano with the same transaxle layout and engine type, is an extreme track car. Ferrari’s engineers have carried out extensive work on the engine’s combustion chambers and inlet and exhaust tracts. These modifications, combined with the fact that internal attrition has been reduced and the maximum revs have been boosted to 9,000 rpm, helped achieve the target power output of 700 hp at 9,000 rpm. Particular attention was also paid to cutting the weight of the engine unit components. This was achieved both by optimising forms - as in the new crankshaft - and adopting exclusive materials, as in the carbon-fibre used for the intake plenums. A new gearbox shift strategy cuts overall gearchange times to 60 ms.

The Ferrari 599XX is characterised by an innovative electronic concept called the “High Performance Dynamic Concept” which has been designed to get the maximum performance from the car by managing the combination of the car’s mechanical limits with the potential of its electronic controls. The mechanical and electronic systems work together to get the maximum performance from the car under extreme high performance driving, for consistent lap times. The sporty handling has been improved thanks to the adoption of second generation SCM suspension system. Track usage is also made easier thanks to the new “virtual car engineer”, a screen in the car that provides a real-time indication of the vehicle’s efficiency.

The Ferrari 599XX’s aerodynamics were honed in numerous wind tunnel test sessions with the result that the car now boasts 280 kg of downforce at 200 km/h (630 kg at 300 km/h). The front underside of the body is completely faired-in and the vents that channel hot air from the engine bay have been moved to the bonnet.

The “ActiflowT” system increases downforce and/or cuts drag depending on the car’s trim cornering conditions, courtesy of the use of a porous material in the diffuser and two fans in the boot which channel the air flow from under the car out through two grilles next to the tail-lights. Winglets have been added to the rear buttresses to increase downforce. while synthetic jets have also been incorporated into the rear of the car to control and smooth the air flow and to reduce drag.

Ferrari’s engineers have also used F1-derived “doughnuts” which partly cover the brake discs and wheel rim. These have the dual function of improving both aerodynamics and brake cooling.

In terms of the bodywork, composites and carbon-fibre have been widely used and the engineers drew on their experience in working with aluminium to reach the weight target. The development of increasingly high-performance materials has also benefited the carbon-ceramic material braking system. The brake pads are now made from carbon-fibre which means that the calipers are smaller whilst guaranteeing the same efficiency. The new racing carbon ceramic braking system also delivers shorter braking distances and is generally more efficient due to the weight saving.